Adaptec
My AccountWhere To BuyDownloadsMy Account
 
leftbar
leftbar
Adaptec Ultra ATA Card 1233
The Adaptec Ultra ATA Card 1233 is an affordable 2-port PCI card that offers reliable storage connectivity for desktop PCs and workstations delivering Ultra ATA data transfer rates of up to 133 MByte/sec. This 32-bit, 33/66 MHz PCI host controller provides dual, fully compliant device-side Ultra ATA-133 channels to access Ultra ATA storage devices such as hard disk drives, CD-ROMs, CD-RWs, DVD-ROMs, and Iomega® Zip® drives.
Small Image of Adaptec Ultra ATA Card 1233
DownloadsDocumentationTechnical Specifications

Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications

Select your operating system or software below

Microsoft

Microsoft Windows 2000
Microsoft Windows 98
Microsoft Windows Millennium
Microsoft Windows XP

Supported Operating Systems
Microsoft® Windows 98SE
Windows ME
Windows 2000
Windows XP
System Environment
  PC

Bus System Interface Type

32-bit/66MHz PCI
Internal Connectors
Two ATA ports
Data Transfer Rate
Up to 133 MByte/sec
System Requirements
Available PCI slot meeting PCI 2.2 specification
Package Contents
  • Adaptec Ultra ATA Host Controller card (ASH-1233)
  • Quick Install Guide
  • CD containing:  -Device drivers and documentation
  • Warranty
    5-year manufacturing and materials warranty

    Port type

    IDE, 2x 40-pin connectors

    Slot type

    32-bit PCI

    Compatibility

  • Compliant with PCI Specification, rev 2.2
  • Compliant with ATA/ATAPI-6 Specifications
  • Compliant with UDMA6 ATA/133 Specifications
  • Supports PCI 33/66 MHz with 32-bit data path
  • Backward compatibility with Ultra ATA/100/66/33 standards
  • Flash BIOS onboard

  • Supported data transfer modes

  • CRC error-checking for data verification and errorless data transfer
  • Burst data transfer rate up to 133 Mbytes/s
  • Supports Ultra DMA (0-6) and Multi-word DMA mode (0-2), and PIO mode (0-4)

  • Device support

  • Supports various brands of Ultra ATA 133/100/66/33 hard disk drives
  • Supports various types of large capacity hard disk drives greater than 137 GBytes (48-bit LBA)
  • Co-exists with onboard IDE controller and allows connection of up to four IDE devices
  • Supports ATAPI devices including CD-ROM and CD-R/RW drives, and Iomega Zip drives

  • Advanced features

  • Auto-detects drive types and fine tunes to optimal performance
  • Compliant with ACPI (Advanced Configuration and Power Interface) PCI Bus Power Management Specification 1.1

  • ---

    rightbar
    rightbar