The Adaptec DuraStor 412R storage enclosure's innovative design packs 12, one-inch drives in a mere 3.5-inches (or 2U) of rack space, allowing to install a large amount of storage in a standard 19-inch rack.The storage enclosure can be combined with an Adaptec DuraStor RAID subsystem to easily provide additional storage capacity. With 146 GByte SCSI drives in each drive bay, the subsystems have the capacity to handle 1.7 TByte of storage.
Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications
Product Description
2U, 12-drive Ultra320 SCSI JBOD solution
Key Differentiators
Cost-effective, high-density, highly reliable storage solution
Bus Configurations
User selectable single or dual bus
Number of SCSI channels
1 to host and 3 to drives or 2 to host and 3 to drives
System Architecture
LVD SCSI
Backplane Design
Passive single plane
Hot-Swap Components
Hard drives, power supplies, cooling fans, and AC power cords
Redundant Components
Error Notification
SAF-TEAudible alarm, status LEDsSNMP traps, network messaging and remote paging
Compliance
SAF-TE 1.0
Number of Drive Bays
12
Drive Types
Low-profile (1-inch high) SCSI disk drives
Drive Capacity
18GB, 36GB, and 73GB (7.2 K, 10K and 15K RPM)
Maximum Cap/Enclosure
876GB (12 x 73GB)
Input Voltage
100-240 VAC (auto-sensing)
Input Current
3.0 Amperes (maximum)
Input Frequency
50-60 Hz
Power Source
Dual independent power supplies
Power Supply Rating
2?350 Watts
Maximum BTUs/hour
1,194 BTUs per enclosure
Dimensions
H?3.5 inches W?17.65 inches D?23.00 inches
Weight
39 lbs
Power Supply Unit
Model # ADA?220PSU
Cooling Fan Module
Model # ADA?320FAN
Complimentary support and/or full manufacturer warranty are provided as well as online resources.
See all Knowledgebase articles DuraStor 412R View articles