Adaptec Series 7 Family

Adaptec Series 7 RAID Adapters

2nd Generation 6Gb/s Adapters
with PCIe Gen3 interface for
Game Changing Performance

The Adaptec Series 7 RAID adapter family features PMC's 24 port RAID-on-Chip (ROC), which combines a x8 PCIe Gen3 interface with 6Gb/s SAS ports to enable a new generation of high- performance RAID adapters that are unmatched by any other ROC in the industry. Adaptec Series 7 RAID adapters are available with 8, 16, or 24 native SAS/SATA ports.

While the PCIe Gen3 interface doubles bandwidth to the host compared to PCIe Gen2, it requires at least 16 6Gb/s SAS/SATA ports to double the bandwidth to the storage devices. Competing 6Gb/s solutions have only 8 ports, and cannot leverage that advantage.

New Levels of Performance
Series 7 adapters perform at up to 6.6 GB/s on sequential reads and up to 5.7 GB/s on sequential writes, more than doubling the performance of competing host-based RAID adapters. With 16 direct-connected solid-state drives (SSDs), Series 7 adapters can deliver over 530,000 IOPS – nearly 10x the performance of previous-generation RAID adapters.

Advanced Data Protection
Adaptec RAID Code (ARC) delivers maximum reliability with RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 (71605E supports 0, 1, 1E, and 10, only) . ARC also offers RAID Level Migration (the ability to easily migrate RAID levels), Online Capacity Expansion (expand capacity without powering down the server), and Copyback Hot Spare (when a failed drive has been replaced, data is automatically copied from the hot spare back to the restored drive). New to Series 7 is its auto configuration capability. Users can operate in HBA mode (expose drives to the host directly) or Simple Volume mode (use fast DRAM cache to reduce latency and improve performance), without the need to use setup tools. In RAID mode, they can mix and match all devices and handle them at the same time.

Connectivity
Series 7 adapters support all types of devices including drives, tapes, autoloaders, external RAID systems. They support migration of disk drives from standard Host Bus Adapters (HBAs) as well as onboard SATA or SAS interfaces from the motherboard.

Introducing mini SAS HD Connectors
These connectors allow for greater flexibility in configuration options by supporting up to 16 native SAS/SATA ports in a Low-Profile MD2 form factor and up to 24 SAS/SATA ports in a full-height half-length form factor. The new connectors can be combined with a wide range of Adaptec SAS HD cables, including straight connectors or Adaptec's first to market right angle connectors.

Zero-Maintenance Cache Protection (ZMCP)
Series 7 adapters can be combined with AFM-700, our third-generation flash-based cache protection module(sold separately) to enable instant battery-free protection of the data within the cache.*

Adaptec maxView Storage Manager
Adaptec maxView Storage Manager provides the powerful features of Adaptec Storage Manager™ in an HTML5 web interface that can be viewed in standard desktop or mobile browsers without the need for separate software installation.

 

*71605E does not support ZMCP or AFM-700

Featured Documents

Highlights     PCIe-SIG Certification

Models
  • 78165: 24 ports (8 internal and 16 external)
  • 72405: 24 internal ports
  • 71685: 24 ports (16 internal/8 external)
  • 71605: 16 internal ports
  • 7805: 8 internal ports
  • 71605E: 16 internal ports
Form Factor

Low Profile MD2:
  • 78165
  • 71605
  • 7805
  • 71605E
Half length, Full Height
  • 71685
  • 72405
All Series 7:

Benefits

    Ideal for entry-level server to high-end server platforms and high-performance workstations without compromising robust 6Gb/s performance and proven Adaptec reliability.

Key Differentiators

  • Low Profile MD2 form factor for up to 24 native SAS/SATA ports
  • Up to 24 native SAS/SATA ports
  • Third generation ZMCP (AFM-700) optional*
  • Complete portfolio of SAS HD cables available

Customer Needs

    High I/O transaction and high bandwidth processing; solutions that reduce energy consumption and maintenance costs.

Key Software Features

  • Optimized Disk Utilization
  • Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, and 60 (78165, 72405, 71685, 71605, 7805)
    Supported RAID levels: 0, 1, 1E, and 10 (71605E)
  • HBA Mode and Simple Volume Mode for automatic deployment
  • Supports up to 256 SAS or SATA devices using SAS expanders
  • Hybrid RAID 1 & 10
  • Quick initialization
  • Online Capacity Expansion
  • Copyback Hot Spare
  • Dynamic caching algorithm
  • Native Command Queuing (NCQ)
  • Background initialization
  • Hot-plug drive support
  • RAID Level Migration
  • Hot spares - global, dedicated, and pooled
  • Automatic/manual rebuild of hot spares
  • SES and SAF-TE enclosure management
  • Configurable stripe size
  • S.M.A.R.T. support
  • Multiple arrays per disk drive
  • Dynamic sector repair
  • Staggered drive spin-up
  • Bootable array support
  • Support for Tape Devices, Autoloaders

Management Utilities

Software
  • Adaptec maxView Storage Manager
  • Web based GUI Management Utility
  • OS Support: Windows, Linux, Solaris VMware
  • Remote configuration, monitoring & notification
  • Remote firmware updates
  • SMI-S Support
  • SMTP
ARCCONF
  • Command Line Interface
  • SMI-S support for VMware
Adaptec BIOS Configuration Utility (CTRL+A)
  • BIOS level configuration utility
  • Flashable BIOS support
Adaptec uEFI BIOS Configuration Utility
  • HII based confi guration utility
  • Flashable BIOS support

Operating System

  • Microsoft Windows
  • Red Hat Linux
  • SUSE Linux
  • Fedora
  • Debian Linux
  • Ubuntu Linux
  • Sun Solaris
  • FreeBSD
  • VMware ESX
For a detailed list see ASK Answer ID 17239.

Data Transfer Rate

    6 Gb/s per port

Bus System Interface

    8-lane PCIe Gen3

Form Factor

  • 72405: Half Length-Full Height
  • 71685: Half Length-Full Height
  • 78165: MD2-Low Profile
  • 71605: MD2-Low Profile
  • 7805: MD2- Low Profile
  • 71605E: MD2- Low Profile

Cache Memory

  • 78165: 1024MB
  • 72405: 1024MB
  • 71685: 1024MB
  • 71605: 1024MB
  • 7805: 1024MB
  • 71605E: 256MB

*71605E does not support ZMCP or AFM-700

Connector Configuration

  • 78165: Two internal mini SAS HD (SFF-8643), Four external mini SAS HD (SFF-8644)
  • 72405: Six internal mini SAS HD (SFF-8643)
  • 71685: Four internal mini SAS HD (SFF-8643), Two external mini SAS HD (SFF-8644)
  • 71605: Four internal mini SAS HD (SFF-8643)
  • 7805: Two internal mini SAS HD (SFF-8643)
  • 71605E: Four internal mini SAS HD (SFF-8643)

Package Contents

    Model 78165
  • Adaptec RAID 78165 adapter
  • Additional low profile vented bracket
    Model 72405
  • Adaptec RAID 72405 adapter
    Model 71685
  • Adaptec RAID 71685 adapter
    Model 71605
  • Adaptec RAID 71605 adapter
  • Additional low profile vented bracket
    Model 7805
  • Adaptec RAID 7805 adapter
  • Additional low profile vented bracket
  • Cables: Two internal mini SAS HD x4 (SFF-8643) to (4x) SATA fanout cables w/ sideband, 0.8m*
    Model 71605E
  • Adaptec RAID 71605E adapter
  • Additional low profile vented bracket
    *Single does not include cables

Physical Size

  • 72405: 4.198 "H x 6.6"L (107mm x 167 mm)
  • 71685: 4.198 "H x 6.6"L (107mm x 167 mm)

  • 78165: 2.535"H x 6.6"L (64mm x 167mm)
  • 71605: 2.535"H x 6.6"L (64mm x 167mm)
  • 7805: 2.535"H x 6.6"L (64mm x 167mm)
  • 71605E: 2.535"H x 6.6"L (64mm x 167mm)

Operating Temperature

    0°C to 55°C* (with 200 LFM airflow without AFM-700)
    0°C to 50°C* (with 200 LFM airflow with AFM-700)

    Note: This Adaptec card contains a powerful RAID processor which requires adequate airflow to operate reliably. Please install this card only into server or PC chassis with recommended airflow (200 LFM).

    * Ambient temperature measured 1" away from the RAID processor

Operating Humidity

    Relative humidity: 10% to 90%, non-condensing

Operating Current

    7805:
    0.1A @ 3.3VDC
    1.5A @ 12VDC measured on PCIe Gen3 systems with 6G drives

    71605:
    0.1A @ 3.3VDC
    1.6A @ 12VDC measured on PCIe Gen3 systems with 6G drives

    71605E:
    0.1A @ 3.3VDC
    1.5A @ 12VDC measured on PCIe Gen3 systems with 6G drives

    71685/72405:
    0.1A @ 3.3VDC
    1.8A @ 12VDC measured on PCIe Gen3 systems with 6G drives

    78165:
    1.1A @ 3.3VDC
    1.3A @ 12VDC measured on PCIe Gen3 systems with 6G drives (max 21.93W)

Regulatory Certification

    CE, FCC, UL, C-tick, VCCI, KCC, CNS

Environmental Compliance

    RoHS

Mean Time Before Failure (MTBF)

    645,612 hours at 40°C

Warranty

    3 years

Flash Modules

6Gb/s Cables: Compatible with Series 7 Products

Model 78165
Single P/N: 2280900-R (SRP) $1120.00

Model 72405
Single P/N: 2274900-R (SRP) $975.00

Model 71685
Single P/N: 2274700-R (SRP) $1120.00

Model 71605
Single P/N: 2274400-R (SRP) $725.00

Model 7805
Kit P/N: 2274200-R (SRP) $660.00
Single P/N: 2274100-R* (SRP) $610.00

Model 71605E
Single P/N: 2274500-R (SRP) $375.00

*Single does not include cables

Where to Buy?

Find an Adaptec Authorized reseller or distributor.

For product questions, email us at adaptecsales@pmc-sierra.com or call 1-800-442-7274 / 408-957-7274