Adaptec - Adaptec Serial ATA II RAID 1420SA

Home

Support

Serial ATA

Adaptec Serial ATA II RAID 1420SA

HostRAID™ Serial ATA II controller supporting RAID 0, 1, & 10 for data protection and increased performance

4 Serial ATA 3Gb/s ports, PCI-X 133 MHz, low-profile form factor with Native Command Queuing, RAID 0, 1, and 10 for desktops, workstations and entry-level servers

Small image of the Adaptec Serial ATA II RAID 1420SA

Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications

Select your operating system or software below

Supported Operating Systems
	Microsoft Windows Red Hat Linux SUSE Linux United Linux Novell Netware For a detailed list see ASK Answer ID 13288

Benefits
	Low-cost Serial ATA 3Gb/s, PCI-X RAID card with HostRAID™ RAID 0, 1 and 10 for data protection and increased performance

Key Differentiators
	RAID 0, 1, 10, and JBOD Native Command Queuing SATA II disk hot plug Flash BIOS allows easy upgrades Background initialization Supports bootable arrays 48-bit LBA supports large capacity drives S.M.A.R.T. and SNMP support

Customer Needs
	Ideal for desktop and workstations as well as entry-level servers requiring low cost SATA RAID 0, 1, and 10.

System Environment
	Small office and home office as a boot device for print, file, and storage servers. Enhanced performance for video editing, video/audio streaming, and gaming applications.

Number of devices
	Up to 4 Serial ATA drives

Bus System Interface Type
	PCI-X /133 MHz (compatible to PCI 32/64 bit)

Data Transfer Rate
	3 Gb/s , 1.5 Gb/s

System Requirements
	Intel IA-32, AMD32, EM64T or AMD64 type servers PCI 2.2 compliant systems PCI-X 64-bit/66-133MHz PCI 64-bit/66MHz Support for both 3.3 and 5 volt PCI signaling

Package Contents
	Adaptec 1420SA controller with full-size bracket Four 1 meter Serial ATA cables Low-profile replacement bracket Quick Install Guide Bootable Installation CD containing: -- Operating system drivers -- Complete user documentation (pdf) Adaptec Storage Manager CD containing: -- Adaptec Storage Manager GUI software -- Complete user documentation (pdf)

Warranty
	3 years


Board Dimensions PCI MD2 form factor (low profile) 2.5 inch H x 6.6 inch L 6.4 cm H x 16.8 cm L Operating Temperature 0° to 55° C Power consumption 0.3 amps@+5V Regulatory Certification FCC, UL, C-tick, CE, VCC Mean Time Before Failure (MTBF) 2,764,975 hours at 40 degrees C