The Adaptec SATA II RAID 1220SA card is a two-port, PCI Express x1 controller featuring Adaptec HostRAID™ - an integrated RAID technology that maximizes system performance and uptime. The Adaptec 1220SA supports up to two 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, and JBOD (individual drive). The Adaptec 48-bit logical block addressing (LBA) support enables use of disk drives exceeding 137 GB in capacity.
Note: Only drivers that are not included or embedded within a supported operating system are listed below. To see a complete list of supported operating systems see the Product Specifications
Bus System Interface Type
Intel or AMD architecture with available PCI Express x1 slot
Board Dimensions
2.5 inch H x 3.5 inch L6.4 cm H x 8.5 cm L
Operating Temperature
0° to 55° C
Power consumption
0.9 amps@ 3.3V
Regulatory Certification
FCC, UL, C-tick, CE, VCC
Mean Time Before Failure (MTBF)
629,523 hours at 40 degrees C
Buy Direct From Adaptecor call 1-800-442-7274
See all Knowledgebase articles Adaptec SATA II RAID 1220SA View articles